A planar approach for manufacturing cardiac stents: design, fabrication, and mechanical evaluation

TitleA planar approach for manufacturing cardiac stents: design, fabrication, and mechanical evaluation
Publication TypeJournal Article
Year of Publication2004
AuthorsTakahata, K., and Y. B. Gianchandani
JournalMicroelectromechanical Systems, Journal of
Volume13
Pagination933 - 939
Date Publisheddec.
ISSN1057-7157
Keywords4 mm, 50 micron, angioplasty balloons, biomedical materials, cardiac stents, cardiology, coronary artery stents, free-standing stents, microelectrodischarge machining, micromachining, planar batch manufacturing, prosthetics, stainless steel
Abstract

A new approach that uses planar batch manufacturing technologies is presented for the design and fabrication of coronary artery stents. Stent samples with different wall patterns have been fabricated from 50- mu;m-thick stainless steel foil using microelectrodischarge machining. Stents have been expanded to tubular shapes by using angioplasty balloons, both inside mock arteries and without external confinement (i.e., free-standing). Free-standing stents exhibit diameter variations of < plusmn;4%, almost zero radial recoil after deflation of the balloon, and longitudinal shrinkage of <3% upon expansion. A variation that uses breakable links to provide additional customization in electrical and mechanical properties is also presented. Loading tests reveal that the radial stiffness of some patterns is comparable to that of commercially available stents with greater wall thickness, while bending compliance, at 0.02 m/N for a 4-mm-long section of the stent, is also favorably large.

URLhttp://dx.doi.org/10.1109/JMEMS.2004.838357
DOI10.1109/JMEMS.2004.838357

a place of mind, The University of British Columbia

Electrical and Computer Engineering
2332 Main Mall
Vancouver, BC Canada V6T 1Z4
Tel +1.604.822.2872
Fax +1.604.822.5949
Email:

Emergency Procedures | Accessibility | Contact UBC | © Copyright 2021 The University of British Columbia