Phase-domain induction motor model for power system simulators

TitlePhase-domain induction motor model for power system simulators
Publication TypeConference Paper
Year of Publication1995
AuthorsMarti, J. R., and T. O. Myers
Conference NameWESCANEX 95. Communications, Power, and Computing. Conference Proceedings. IEEE
Pagination276 -282 vol.2
Date Publishedmay.
Keywordscoils, coupled coils, coupled inductances, data conversion procedure, electric machine analysis computing, EMTP, induction motor, induction motors, machine theory, phase coordinates, phase-domain model, power system analysis computing, power system simulators, rotor windings, rotors, stator windings, stators, transient analysis
Abstract

Traditional induction motor models are either 60-Hz models for steady-state operation or dq0 models for transient analysis. This paper presents a general induction-motor model based directly on phase coordinates. Stator and rotor windings are seen as coupled coils, much like a transformer. For transient analysis, this model is basically the same (apart from the mechanical equations) as the standard model for coupled inductances in the EMTP. In addition to the general model equations, the paper presents the data conversion procedure to obtain the model parameters from standard manufacturers data. Simulation results show the validity of the model as compared to a standard (dq0) EMTP induction motor model

URLhttp://dx.doi.org/10.1109/WESCAN.1995.494041
DOI10.1109/WESCAN.1995.494041

a place of mind, The University of British Columbia

Electrical and Computer Engineering
2332 Main Mall
Vancouver, BC Canada V6T 1Z4
Tel +1.604.822.2872
Fax +1.604.822.5949
Email:

Emergency Procedures | Accessibility | Contact UBC | © Copyright 2020 The University of British Columbia