Sequence detection for Bluetooth systems

TitleSequence detection for Bluetooth systems
Publication TypeConference Paper
Year of Publication2004
AuthorsJain, M., L. Lampe, and R. Schoher
Conference NameGlobal Telecommunications Conference, 2004. GLOBECOM '04. IEEE
Pagination3604 - 3608 Vol.6
Date Publishednov.
KeywordsBluetooth, Bluetooth systems, channel bank filters, channel phase variations, complexity constraints, computational complexity, discriminator detector, filter, filter bank, frequency shift keying, GFSK, local oscillators, matched filters, power efficient receivers, radio receivers, sequence detection, signal detection, two-state trellis
Abstract

The design of power efficient receivers for Bluetooth systems is a challenging task due to stringent complexity constraints. We tackle this problem and present a novel receiver consisting of a single filter and a subsequent sequence detector. This receiver outperforms the conventional discriminator detector by more than 4 dB for typical Bluetooth channels. Thereby, the proposed sequence detection (SD) algorithm is of favorable low complexity, as it operates on a two-state trellis, and is highly robust against channel phase variations caused by low-cost local oscillators. Different from previously published work on SD, we take possible variations of the Bluetooth modulation parameters into account. Hence, the presented receiver design is an attractive solution for practical Bluetooth devices.

URLhttp://dx.doi.org/10.1109/GLOCOM.2004.1379038
DOI10.1109/GLOCOM.2004.1379038

a place of mind, The University of British Columbia

Electrical and Computer Engineering
2332 Main Mall
Vancouver, BC Canada V6T 1Z4
Tel +1.604.822.2872
Fax +1.604.822.5949
Email:

Emergency Procedures | Accessibility | Contact UBC | © Copyright 2020 The University of British Columbia