Pjase-domain multiphase transmission line models

TitlePjase-domain multiphase transmission line models
Publication TypeJournal Article
Year of Publication1997
AuthorsCastellanos, F., J. R. Marti, and F. Marcano
JournalInternational Journal of Electrical Power & Energy Systems
Volume19
Pagination241-248
Date PublishedMAY
Type of ArticleProceedings Paper
ISSN0142-0615
KeywordsEMTP simulation, idempotent analysis, phase-domain modelling, transmission line modelling
Abstract

In general, multiphase transmission line and cable models for transient programs, such as the EMTP, base their solutions on transformations between the phase and modal domains. The main difficulty with these models is the synthesis of the frequency dependent transformation matrices. This paper presents two line models that circumvent this problem by writing the propagation functions directly in the phase domain and thus avoid the use of modal transformation matrices. The first model (developed in connection with our work on corona modelling) avoids the use of modal transformation matrices by separating the ideal-line travelling effect from the loss effects (resistance and internal inductance). The second proposed model is a full frequency dependent distributed parameter model based on idempotent decomposition. By using idempotents instead of eigenvectors as the basis for modal decomposition, the problems associated with the indeterminacy of the frequency dependent eigenvector functions are eliminated. (C) 1997 Elsevier Science Ltd.

a place of mind, The University of British Columbia

Electrical and Computer Engineering
2332 Main Mall
Vancouver, BC Canada V6T 1Z4
Tel +1.604.822.2872
Fax +1.604.822.5949
Email:

Emergency Procedures | Accessibility | Contact UBC | © Copyright 2021 The University of British Columbia