Multiplexed ARQ for time-varying channels - Part I: System model and throughput analysis

TitleMultiplexed ARQ for time-varying channels - Part I: System model and throughput analysis
Publication TypeJournal Article
Year of Publication1998
AuthorsCam, R., and C. Leung
JournalIEEE Transactions on Communications
Volume46
Pagination41–51
ISSN0090-6778
Abstract

In this paper, a model is developed for a slotted time-division multiplexing system used for assigning transmissions over a set of time-varying channels, Two schemes, a "round-robin" and an adaptive multiplexing scheme, are studied for use with three standard automatic-repeat-request (ARQ) protocols, namely, stop-and-wait (SW), go-back-N (GBN), and ideal selective repeat (ISR), In round-robin multiplexing, transmission slots are assigned periodically to each channel, With the adaptive scheme, the multiplexer selects at each time slot the channel whose state is estimated to have the lowest retransmission probability, The throughputs of these ARQ protocols under either multiplexing scheme are analyzed and compared, Part I of this paper contains a description of the system model and an analysis of the ARQ protocols under both multiplexing schemes, In Part II, a modification to GBN and SR ARQ for reducing the detrimental effects of feedback errors is discussed and analyzed, followed by a throughput performance comparison of all ARQ and multiplexing schemes.

a place of mind, The University of British Columbia

Electrical and Computer Engineering
2332 Main Mall
Vancouver, BC Canada V6T 1Z4
Tel +1.604.822.2872
Fax +1.604.822.5949
Email:

Emergency Procedures | Accessibility | Contact UBC | © Copyright 2020 The University of British Columbia